transparant gif
Corporate Profile
 
transparant gif
Industries & Services
 
transparant gif
Refining
 
transparant gif
Hydrogen
 
transparant gif
Natural Gas Processing
 
transparant gif
He & H2 Liquefaction
 
transparant gif
Fabrication Capabilities
 
transparant gif
News & Information
 
transparant gif
Employment Opportunities
 
transparant gif
TradeMarks
 
transparant gif
Linde Links
popup arrow pop connector1 pop connector2 pop connector3
Linde Process Plants, Inc.
A Member of The Linde Group		6100 South Yale Avenue
Suite 1200
Tulsa, OK 74136
United States		Phone: 918 477 1200
Fax: 918 477 1100
E-mail: sales@lppusa.com
Print

Fabrication Capabilities

Linde Process Plants, Inc. (LPP)’s Fabrication Facility is located on 24 acres in the City of Tulsa, Port of Catoosa Industrial Complex. The facility is comprised of two fabrication shops, two office buildings, and outdoor staging, assembly, and storage areas.

Port of Catoosa Fabrication Facility

goto topTop goto next paragraphNext
 

Fabrication Capabilities - Structural Steel Fabrication

Structural steel fabrication is done in a 35,000 square foot shop with 2 bays that are 70 feet wide by 250 feet long each. The following products are fabricated in this shop:
  • Cold box structures
  • Module structures
  • Ladders and platforms
  • Piperack structures
  • Duct work
  • Vessel skirts, base rings, supports and other non-pressure parts
  • Flare stacks
  • Heater shells
  • Non-code vessels and tanks
  • Tanks, decks and piperacks for NGL vaporizers
goto topTop goto next paragraphNext
 

Fabrication Capabilities - Painting Fabrication Facilities

The fabrication facility works with stainless steel, chrome nickel, aluminum, and carbon steel. The primary welding processes used are FCAW, GMAW-S and SAW. This shop normally works 2 shifts.
All other fabrication is done in a 126,000 square foot shop with 6 bays that are 70 feet wide by 300 feet long each.

Bay 1- Blasting and Painting
  • Hoffman grit blast booth- 22 feet wide x 20 feet high x 80 feet long
  • Heated for curing of epoxies and polyurethanes
  • Internal pipe blasting and coating from 2 inch through 18 inch
  • Certified to apply Carboline fireproof material
  • Standard paint systems are Carboline 2-3 coat systems
  • Normally a 2-shift operation
goto topTop goto next paragraphNext
 

Fabrication Capabilities - Assembly Facilities

Bays 2, 3 and 4- Mechanical Assembly, Electrical and Instrumentation. Vertical Module in LPP Shop
















  • 100,000 pound (50 ton) lifting capacity.
  • 400,000 pound (200 ton) hydraulic jacking capacity
  • Up to 5,000 psi pressure testing
  • Functional testing of electrical and instrumentation
  • Normally a 1 shift operation buts expands to 2 shifts when required
goto topTop goto next paragraphNext
 

Fabrication Capabilities - Pipe Fabrication Facilities

Bay 5- Pipe Fabrication
  • Material capabilities
    Carbon steel
    Stainless steel
    Aluminum
    Inconel
    Monel
    Chrome Moly
    Hastelloy
  • Primary welding processes are:
    • GTAW
    • FCAW
    • SAW
    • GMAW-S
  • Normally a 2-shift operation
  • In-house radiography
    • goto topTop goto next paragraphNext
     

    Fabrication Capabilities - Warehouse and Testing Facilities

    Bay 6- Warehouse and X-ray Vault LPP is ISO 9001:2000 certified. There are 3 certified ISO auditors at the Shop that monitor all aspects of the operation. There are 7 Certified Welding Inspectors at this location, which includes Shop supervision.
    • Inspection
    • Receiving
    • Equipment and Component Staging
    • Testing Systems Liquid He
    goto topTop
    Fabrication Capabilities

    Page History